BDS 7" Suspension Lift Kit for 2016-2017 Tundra 2WD/4WD
- Important Kit Notes
- Vehicle Fitment Data
- Base Kit Components
- Manufacturer's Warranty Statement
BDS Suspension 7" lift kit for the 2016-17 Toyota Tundra 4WD Pickups.
This complete 7" IFS w/ strut mount lift kit system incorperates the same features and performance benefits of our 07-15 Tundra system. Designed for more than just daily driving, this system will handle about any off road excursion you can think of. The heavy duty main crossmembers are locked together by a full belly pan that offers superior off road protection.
Included with this IFS lift kit are CNC machined steering knuckles which ensure a clean and simple install. The lift is achieved with lower strut mounts and a stuft preload spacer. Rear NX² series shock absorbers are included with Fox 2.0 series gas shocks available as an upgrade for this 7" Toyota Tundra lift kit.
Note: Components displayed in images may change based upon selections.
1. Requires frame bracket modification and welding.
2. Strut compressor required for installation.
3. Stock 17", 18", and 20" wheels cannot be reinstalled.
4. Models with two piece rear driveline will require rear driveline modification.
5. Rear shackle kit can be added for 1" additional lift
6. Models equipped with 6 piston calipers require modification.
7. Will NOT work on TRD Pro (Bilstein Piggback Strut) models.
Front (Base Kit): 7 in IFS System
Rear (Base Kit): 4 in Block Kit
Tire and Wheel Combinations
35 x 12.50 with 18x9 and 5-1/2" backspacing
35 x 12.50 with 20x9 and 5-1/2" backspacing
37 x 12.50 with 20x9 and 6-1/4" backspacing
*Trimming may be required*
Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 8
PDF (click here)
|(1)||018409||07-09 Tundra Rear|
|(1)||028701||07-09 Tundra Box 2 Of 5|
|(1)||028702||07-09 Tundra Box 3 Of 5|
|(1)||028703||07-09 Tundra Box 4 Of 5|
|(1)||028704||07-09 Tundra Box 5 Of 5|
|(1)||028710||2016 Tundra Box Kit (1of5)|
|(2)||85952||NX² Shock Absorber|
*Subject to change based upon selections
No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.
Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.