BDS 7" Coilover Lift Kit for 2016-2017 Tundra 2WD/4WD
- Important Kit Notes
- Vehicle Fitment Data
- Base Kit Components
- Manufacturer's Warranty Statement
BDS Suspension 7" Coil-over Suspension System for the 2016-17 Toyota Tundra 4WD Pickups.
Through a collaborative effort between BDS Suspension and Fox Racing, this 7" system for 2016-17 Tundras incorperates the same quality design and performance enhancements as our popular 07-15 system.Featuring Fox 2.5" coil-over remote reservoir shocks, this system has been rigorously tested to maximize travel and performance on and off the pavement.
This system utilizes BDS proven design standards including one-piece front & rear crossmembers coupled with precision machined ductile cast iron steering knuckles. The steering knuckles are designed to work within the factory traction control constraints and provide stock-like handling characteristics. The knuckles are also considerably more robust in both the mass and strength categories over the rather light-duty stock components.
The BDS High Clearance crossmembers are built from 1/4" laser cut steel and maximize ground clearance and strength. The relocated differential is protected by a skid plate tying the crossmemember together. The system also includes new sway bar links to correct the sway bar geometry.
The rear of the kit comes all the components necessary to level the truck and center the axle in the wheel well. This includes a 4" block, u-bolts and brake line relocation brackets. BDS by Fox 2.0 series rear shocks come standard in this system.
Nothing complements this BDS Suspension better than the race proven design of Fox 2.5" remote reservoir coil-over front shocks. These have been specifically engineered to fit the BDS Suspension system and feature an external reservoir for increased oil cooling capacity and nitrogen volume for a more consistent and comfortable ride. These have also been pre-set by BDS to the correct ride height for an easy installation, but can also be fined tuned to your liking.
Note: Components displayed in images may change based upon selections.
1. Requires frame bracket modification and welding on 4wd models.
2. Stock 18" wheels can not be installed. Factory 20" wheels with more than 6.25" backspacing can not be installed.
3. Models with two piece rear drive line would require rear drive shaft modification.
4. Models equipped with 6 piston calipers require modification.
5. Will work on TRD Pro Models.
Front (Base Kit): 7 in Coil-Over System
Rear (Base Kit): 4 in Block Kit
Tire and Wheel Combinations
35 x 12.50 with 18x9 and 5-1/2" backspacing
35 x 12.50 with 20x9 and 5-1/2" backspacing
37 x 12.50 with 20x9 and 6-1/4" backspacing
*Trimming may be required*
Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 8
PDF (click here)
|(1)||018409||07-09 Tundra Rear|
|(1)||028701||07-09 Tundra Box 2 Of 5|
|(1)||028702||07-09 Tundra Box 3 Of 5|
|(1)||028703||07-09 Tundra Box 4 Of 5|
|(1)||028710||2016 Tundra Box Kit (1of5)|
|(1)||128700||07-16 Tundra Fox C/O Mounting Kit|
|(1)||88302057||Kit: BDS 07-20 Toyota Tundra Front Coilo|
|(2)||98224952||Fox 2.0 Shock 29.85 x 18.25 x 2- S50/EB1|
*Subject to change based upon selections
No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.
Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.