• BDS 2.5" Strut Spacer Lift Kit Toyota Tacoma 4WD
BDS817H

BDS 2.5" Strut Spacer Lift Kit for 2005-2019 Tacoma 4WD

  • $122.49

BDS Suspension Toyota Tacoma 2.5" Strut Spacer Lift.

This option for the popular mid-sized Tacoma provides that desired level stance and gives a little extra room for larger tires. The kit is 100% bolt-on and does not require a strut compressor. The spacers are made from heavy-duty 3/16" steel plate that is fully welded and painted.

An optional rear 2" block kit (018218) can be added for a full front and rear lift and complemented by NX² series (85954) or Fox 2.0 (98224954) optional rear shocks.

This system will also fit 2wd PreRunner models, but will not work on the standard 2wd model.

Note: Components displayed in images may change based upon selections.

1. 265/75R16 tires on the stock wheels or equivalent.
2. This system will also fit 2wd PreRunner models, but will not work on the standard 2wd model.

Lift Height
Front (Base Kit): 2.5 in Strut Spacer
Rear (Base Kit): N/A 

Tire and Wheel Combinations
265/75-16 with 16x7 and Stock backspacing
*Trimming may be required* 

Make

Model

Lift

Location

Year Range

Toyota

Tacoma 4WD

2.5"

Front

2005-2019

Difficulty Level (1 easy – 5 complicated): 2
Estimated Installation Time (hours): 2

Instructions
PDF (click here)

Qty

Part#

Description

(1)

028251

2005-15 Tacoma 2.5in Strut Spacer Kit

*Subject to change based upon selections

No Fine Print Warranty

BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)

Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.