BDS 6" Coil-Over Lift Kit for 2005-2015 Toyota Tacoma 4WD
- Important Kit Notes
- Vehicle Fitment Data
- Base Kit Components
- Manufacturer's Warranty Statement
Engineered for Next Level Performance.
These 6" performance coilover systems are designed to take your Tacoma to the next level to maximize performance and capability on and off-road. At the heart of system are FOX 2.5 factory series remote reservoir coilovers built to outperform the competition. These are pretuned for optimal performance and pre-set for correct ride height right out of the box. From there these kits utilize heavy duty front & rear crossmembers, full width belly skidplate and multipoint differential relocation brackets to create a solid subframe to mount the suspension components and improved offroad protection. These combined with the high strength ductile iron steering knuckles offer optional on-road handling with ESC System compatibility along with improved ground clearance for better offroad performance. Additionally this kit includes bump stop brackets, sway bar relocation, lower control arm cams and brake line brackets.
In the rear 4" lift blocks are supplied along with longer u-bolts and brake line brackets to set the rear up and level out the stance. Finishing off the rear are FOX 2.0 performance series IFP gas shocks. This system will also fit 2wd PreRunner models, but will not work on the standard 2wd model.
Note: Components displayed in images may change based upon selections.
1. Minor welding required
2. Requires frame bracket modification
3. Strut compressor required for installation
4. Stock wheels cannot be reinstalled
5. System will work on 2WD PreRunner models
6. Can not use 17" wheels.
7. Some 2014-15 models may not achieve net lift height stated but will have the same lift stance/final height of an equally equipped 05-13 model
Front (Base Kit): 6 in Coil-Over System
Rear (Base Kit): 4 in Block
Tire and Wheel Combinations
35 x 12.50 with 18 x 9 and 4.5" Max. backspacing
- with 20 x 9 and 4.5" Max. backspacing
*Trimming may be required*
Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 6-8
PDF (click here)
|(1)||018408||05-12 Tacoma 4in Rear Block Kit|
|(1)||028600||05-17 Tacoma Front Box Kit 1 of 4|
|(1)||028601||05-15 Tacoma Front Box Kit 2 of 4|
|(1)||028602||05-15 Tacoma Front Box Kit 3 of 4|
|(1)||88302048||Kit: BDS 05-20 Tacoma Front Coilover, 2.|
|(2)||98224953||Fox 2.0 Shock 29.85 x 18.25 x 2- S50/EB1|
*Subject to change based upon selections
No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.
Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.