• BDS 4-1/2" Suspension System - Toyota Tundra

BDS 4.5" Lift Kit for 2007-2015 Tundra 2WD/4WD

  • $2,003.92

BDS Suspension 4-1/2" Lift Kit for the 2007 - 2015 Toyota Tundra 2WD & 4WD.
This complete 4-1/2" IFS w/ strut mount lift kit system is not only built for daily driving, but will handle about any off road excursion you can think of. The heavy duty main crossmembers are locked together by a full belly pan that offers superior off road protection.
Included with this IFS lift kit are CNC machined steering knuckles which ensure a clean and simple install that is made easier by the lower strut mounts that don't require you to disassemble the strut. Rear NX² series shock absorbers are included with 9500 series gas shocks available as an upgrade for this 4-1/2" Toyota Tundra lift kit.

Note: Components displayed in images may change based upon selections.

1. Requires frame bracket modification and welding.
2. No strut dissassembly required.
3. Stock 18" wheels can not be installed. factory 20" wheels with more than 6.25" backspacing can not be installed.
4. Models with two piece rear drive line would require rear drive shaft modification.
5. When kit is installed on 2WD models, the differential brackets will not be used.
6. ***Will work with Bilstein (yellow) factory front struts on 2014-2015 models.***
7. Models equipped with 6 piston calipers require modification.
8. Will NOT work on TRD Pro Models.

Lift Height
Front (Base Kit): 4.5 in IFS System
Rear (Base Kit): 3 in Block Kit

Tire and Wheel Combinations
35 x 12.50 with 18x9 and 37377 backspacing
35 x 12.50 with 20x9 and 5-1/2 - 6.25" backspacing
*Trimming may be required* 

Make Model Year Range
Toyota Tundra 2WD 2007-2015
Toyota Tundra 4WD 2007-2015

Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 8

PDF (click here)

Qty Part# Description
(1) 018319 07-09 Tundra 3 In Rear
(1) 028454 07-09 Tundra Box 5 Of 5
(1) 028700 07-09 Tundra Box 1 Of 5
(1) 028701 07-09 Tundra Box 2 Of 5
(1) 028702 07-09 Tundra Box 3 Of 5
(1) 028703 07-09 Tundra Box 4 Of 5
(2) 85952 NX² Shock Absorber

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.