• BDS 3" Leveling Kit - Toyota Tundra
BDS810H

BDS 3" Leveling Kit for 2007-2020 Tundra 2WD/4WD

  • $122.99

BDS Suspension 3" Upper Strut Mount Leveling Kit for the Toyota Tundra 4WD & Tundra 2WD.
This 3" leveling kit comes with new upper strut top spacers. No disassembly of the strut is required.
This kit is designed to level your vehicle. However, if you desire to maintain the stock rake there is a 1" shackle or 2" rear block kit available when you build your kit. Other options include rear shock absorbers for this 3" Toyota Tundra leveling kit.

Note: Components displayed in images may change based upon selections.

1. This kit is designed to level your vehicle. However, if you desire to maintain the stock rake there is a 1" shackle or 2" rear block kit available when you build your kit.
2. Will NOT work on TRD Pro models.

Lift Height
Front (Base Kit): 3 in Upper Strut Mount
Rear (Base Kit): N/A

Tire and Wheel Combinations
33 x 12.50 with - and 5" backspacing
33 x 12.50 with Stock and Stock backspacing
*Trimming may be required* 

Make Model Year Range
Toyota Tundra 2WD 2007-2020
Toyota Tundra 4WD 2007-2020

Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 3

Instructions
PDF (click here)

Qty Part# Description
(1) 028300 07 Tundra Front Box Kit

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.