• BDS 2" Leveling Kit
BDS694H

BDS 2" Leveling Kit for Dodge/Ram 2019 3500 Pickup & 2013-2018 3500 Pickup Without Air-Ride

  • $371.95

BDS Suspension 2" leveling Kit for Dodge RAM 3500 pickup trucks.
These 2" leveling kits are designed to lift and level the stance of your new RAM 3500 using a pair of heavy-duty steel fabricated coil spacers allowing clearance for 35" tires to be installed. Compatible with the RAM 3500 4WD trucks, the lift comes from a pair of specially designed top mount steel fabricated coil spacers. They are pitched and indexed to work with the unique coil mount design of the late model RAM HD trucks and are secured to the coil bucket to maintain proper indexing when the coil springs are unloaded. With the additional ride height the front bump stops are replaced with taller polyurethane units to control suspension compression. Rounding out these leveling kits is your choice of BDS NX2 gas series or FOX 2.0 IFP performance gas shocks at all four corners to improve ride quality.
This system comes with the NX² series custom valved shocks. Need more control? Upgrade to the Fox 2.0 performance series gas monotube shocks for increased control.

Note: Components displayed in images may change based upon selections.

1. Will NOT fit RAM Doge/Ram 3500 pre 2013 models
2. Will NOT fit 2013 1 Ton has the 4-Link Front Suspension.
3. Will NOT fit models with rear air suspension.
4. NOT designed for Cab and Chassis Models.

Lift Height
Front (Base Kit): 2 in Coil Spacer
Rear (Base Kit): N/A

Tire and Wheel Combinations
35x12.50 with 17x9/18x9/20x9 and 5" backspacing
*Trimming may be required* 

Make Model Type Lift Year Range
Dodge / Ram 3500 Pickup 2" 2019
Dodge / Ram 3500 Pickup w/o Air-Ride 2" 2013-2018

Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 4

Instructions
PDF (click here)

Qty Part# Description
(1) 012203 14-18 2500 / 13-18 3500 2in Leveling
(2) 85713 NX² Shock Absorber
(2) 85759 BDS NX2 Shock Absorber

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.