BDS 3" Suspension Lift Kit for Dodge/Ram 03-13 2500 Pickup & 03-12 3500 Pickup

BDS Suspension 3" Lift Kit for the 2003-2013 Dodge 2500 3/4 Ton & 2003-2012 3500 1 Ton 4WD Gas & Diesel Pickup.
This 3" lift kit features 3" front Pro-Ride Coil Springs. Diesel models get dual rate springs providing great ride and performance in all conditions. Gas model coil springs are designed specifically for the weight of the gas engine for optimum ride quality.
Fixed length, greaseable, heavy-duty round tubular construction UCAs and LCAs position the axle properly and adjust for proper caster and pinion angles. Fixed length sway bar links with stud eliminator. The sway bar link setup converts the failure prone stem style factory sway bar links to eye-to-eye design providing greater strength, longer service life and greater range of motion. An adjustable front track bar is included as well to center the axle.
Not only is the kit designed to last, but so is the finish. Every bracket is electrocoated black to ensure long term performance of our finish.

Note: Components displayed in images may change based upon selections.

1. Measure rear axle tube before ordering. Some 4" axle models have dual overloads that will require #4063 u-bolts.
2. Rear lift options will not fit dually applications
3. Not recommend for PowerWagon models
4. Will not fit Cab and Chassis models
5. Coil springs are specifically designed for each vehicle. Please select engine type so we can get you the appropriate custom rated coil springs.

Lift height
Front (Base Kit): 3 in Pro-Ride Coil Springs
Rear (Base Kit): 2 in Block Kit

Tire and Wheel Combinations
35" x 12.50" with 17 x 9 and 5" backspacing
*Trimming may be required* 

Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 6-8

Instructions
PDF (click here)

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.