• BDS 3" Performance Coilover System - Dodge 3/4 & 1 Ton 4WD
BDS690F

BDS 3" Performance Coilover Suspension Lift Kit for Dodge/Ram 2003-2013 2500 Pickup & 2003-2012 3500 Pickup

  • $2,853.82

BDS Suspension 3" Lift Kit for the 2003-2013 Dodge 2500 3/4 Ton & 2003-2012 3500 1 Ton 4WD Gas & Diesel Pickup.
This addition to the heavy-duty Ram coilover conversion lineup rounds out the lift height offerings for these vehicles. You can now choose a coilover upgrade for all 3", 6" and 8" lift options available.
The new 3" system is built as an upgrade to our popular 691H 3" Dual Rate Coil lift system with the coilovers replacing the 3" coil springs and working alongside the existing front and rear box kits.
The new coilovers provide a full 8" of suspension travel in order to maximize the performance of the short arm suspension setup. In addition to the coilovers and coilover mount kit (same as uses with the 6" and 8" kits), the front box kit includes an adjustable front track bar, replacement extended sway bar links and a complete set of greaseable upper and lower control arms.
The rear is lifted via a 2" block and u-bolts. Fox 2.0 shocks round out the rear.

Note: Components displayed in images may change based upon selections.

1. Measure rear axle before ordering. Although rare, some early model diesel trucks came with 3.5" rear axle tubes. In this case replace rear box kit 012207 with 012208
2. Some 4" axle models with dual overload leaf springs will require longer #4063 u-bolts.
3. Will NOT work on dually or Powerwagon models
4. Will not fit Cab and Chassis models

Lift Height
Front (Base Kit): 3 in Fox Coilovers
Rear (Base Kit): 2 in Block Kit

Tire and Wheel Combinations
35" x 12.50" with 17 x 9 and 5" backspacing
*Trimming may be required* 

Make Model Year Range
Dodge / Ram 2500 Pickup 2003-2013
Dodge / Ram 3500 Pickup 2003-2012

Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 6-8

Instructions
PDF (click here)

Qty Part# Description
(1) 012207 03-13 Dodge 2500 2in Rear Box w/4
(1) 012304 03-13 Dodge 2500 3in Box Kit
(1) 122810 03-12 Ram 2500 Coilover Mount Kit
(1) 88402109 Kit: BDS 03-13 Ram 2500/3500 Front Coilv
(2) 98224759 Fox 2.0 Shox 29.8 x 12.6 x 2 -EB1-EB1

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.