BDS 4" Suspension Lift Kit for 2013-2018 Dodge/Ram 1500 Pickup Without Air-Ride
- Important Kit Notes
- Vehicle Fitment Data
- Base Kit Components
- Manufacturer's Warranty Statement
BDS Suspension 4" Suspension Lift Kit for Dodge Ram 1500 4WD Gas 1/2 Ton Pickup.
This 4" lift kit will clear up to 35" tires and is based around two one-piece, 1/4" laser cut high-clearance crossmembers and replacement steering knuckles. The high-clearance crossmembers increase ground clearance for off road performance.
The replacement steering knuckles reduce installation time as well as maintain proper steering angles and ball joint angles. A differential skid plate is included for off road protection.
The system also includes bump stop drops, anti-sway bar links, 3 point differential drop system, strut relocation brackets, and front stainless steel brake lines. The rear is lifted via BDS 2" coil spacers to level most trucks.
The rear for this Dodge Ram lift kit is completed with a track bar bracket, upper link relocation brackets and sway bar links. A 3" rear coil spring option is available depending on your desired stance. Check out more options and build your own kit by clicking on customize this kit.
Choose between the custom valved NX² series or the Fox 2.0 series gas charged monotube rear shocks.
Note: Components displayed in images may change based upon selections.
1. The rack and pinion steering system is extremely sensative to an out-of -round or out-of-balance tire/wheel combination. The larger the tire and the less the backspacing, the more sensative the system becomes, causing minor steering wheel shimmy.
2. Not recommended for AWD models.
3. Stock 17" wheels can not be re-installed. Stock 20" can be reinstalled with factory tire.
4. Will not fit adjustable air suspension equipped models
5. This kit is FMVSS No.126 Compliant
The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well. BDS Suspension is leading the industry by independently testing all suspension kits to verify our kits are fully compliant with the stability control system requirements set by Federal Motor Vehicle Safety Standard (FMVSS) No. 126.
Front (Base Kit): 4 in IFS System
Rear (Base Kit): 2 in Coil Spacer
Tire and Wheel Combinations
35" x 12.50" with 17 x 9 and 4-1/2" backspacing
35" x 12.50" with 18 or 20 x 9 and 5" backspacing
*Trimming may be required*
|Dodge / Ram||1500 Pickup||w/o Air-Ride||2013-2018|
Difficulty Level (1 easy – 5 complicated): 4
Estimated Installation Time (hours): 10
PDF (click here)
|(1)||022209||09-12 Dodge 1500 2in Rear Spacer Kit|
|(1)||022402||2012 Dodge 1500 4in Frnt Box Kit 3of4|
|(1)||022625||2012 Dodge 1500 6 in Frnt Box Kit 4 of 4|
|(1)||022630||2013 DODGE 1500 4WD FRONTBOXKIT (1 OF 4)|
|(1)||022631||2013 DODGE 4WD FRONTBOXKIT (2 OF 4)|
|(2)||85758||NX² Shock Absorber|
*Subject to change based upon selections
No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.
Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.