• BDS 8" Long Arm Lift Kit - Dodge 3/4 & 1 Ton
BDS641H

BDS 8" Long Arm Suspension Lift Kit for 2008 Dodge/Ram 1500 Mega Cab & 2008 2500/3500 Pickup

  • $2,265.40

BDS Suspension 8" Long Arm Kit for the 2008 3/4 Ton & 1 Ton 4WD Pickup.
This 8" long arm kit includes progressive rate, front Pro-Ride Coil Springs and heavy duty, long upper and lower control arms. The lift kit includes solid upper long arms and tubular lowers to reduce caster change through wheel travel creating a more controlled feeling in the steering wheel both on and off road. This 4-Link long arm system retains the factory triangulation of the arms as well which adds to the stability of the suspension system. What does this mean Basically it drives great both on and off road. All four control arms are greasable for long term performance.
A dropped forged pitman arm is included to maintain the factory steering angles. A track bar relocation bracket properly centers the axle under the vehicle. Extended bump stops and sway bar links maintain the OE characteristics.
The rear of the Dodge Ram is lifted via a 5" block kit or optional Glide-Ride Leaf Springs. Not only is the kit designed to last, but so is the finish. Every bracket and control arm is powder coated black for long term performance.

Note: Components displayed in images may change based upon selections.

1. Measure rear axle tube before ordering. Some models with dual overloads will require 4068.
2. Rear lift options will not fit dually applications.
3. Exhaust modification will be required for dual rear shock kit 122009.
4. 2500 Gas models will require modification to the front exhaust crossover pipe on driver side for proper clearance when a transfer case indexing ring kit is installed
5. Will not fit Cab and Chassis models.

Lift Height
Front (Base Kit): 8 in Long Arm
Rear (Base Kit): 5 in Block Kit

Tire and Wheel Combinations
38" x 14.0" with 17 x 9 and 4.5" backspacing
*Trimming may be required*

Make Model Lift Year Range
Dodge / Ram 1500 Mega Cab 2008
Dodge / Ram 2500 Pickup 2008
Dodge / Ram 3500 Pickup 8" 2008

Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 8

Instructions
PDF (click here)

Qty Part# Description
(1) 012516 Dodge 5in Rear Block Kit w/4"
(1) 012801 Dodge Control Arm Mounts
(1) 012802 Dodge Control Arm Box Kit
(1) 012804 08 Dodge Ram Long Arm Box Kit
(1) 032801 Dodge 8in Coil spring
(1) 122801 T-Case Indexing Kit (Automatic)
(2) 85751 NX² Shock Absorber
(2) 85761 NX² Shock Absorber

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.