BDS 8" Performance Coil-Over Lift Kit for 09-13 Dodge/Ram 2500 Pickup & 09-12 3500 Pickup
- Important Kit Notes
- Vehicle Fitment Data
- Base Kit Components
- Manufacturer's Warranty Statement
BDS Suspension 8" Performance Coil-Over System for the 2009-2013 Dodge 2500 3/4 Ton & 2009-2012 3500 1 Ton 4WD Pickup including Mega Cab.
BDS Performance Series Systems feature Fox 2.5 Reservoir Coilovers. These systems were designed specifically to combine the high-performance characteristics of the Fox 2.5 coilovers and BDS long arm suspension systems to create the ultimate 8" suspension system. The Fox coilovers are preset to achieve 8" of lift right out of the box and tuned for an amazing ride on and off road. In order to install the coilovers, we have developed a mounting system that bolts directly to the factory coil mounts with only minor trimming/drilling required. This new system not only creates a sturdy mount at the frame, it also includes weld in reinforcements at the axle - something other "bolt-on" mounting kits on the market do not address. The coilovers along with the mounting system can be purchased separately to retrofit any previously install BDS 8" long arm system.
The rear of the Dodge Ram can be lifted with your choice of a 5" block kit or full replacement rear Glide Ride leaf springs.
Note: Components displayed in images may change based upon selections.
2. Rear lift options will not fit dually applications.
3. If driveline vibration occurs, order either transfer case drop or indexing kit available in optional accessories. NOTE: 122606 transfer case drop kit will only replace the OE bracket #52121938AA
4. 102009 Rear brake lines will not fit 2012-2013 models.
5. Additional front driveline modification may be required.
6. Exhaust modification will be required for dual rear shock kit 122009.
7. Will not fit Cab and Chassis models
Front (Base Kit): 8 in Long Arm
Rear (Base Kit): 5 in Block Kit
Tire and Wheel Combinations
38" x 14.0" with 17 x 9 and 4.5" backspacing
*Trimming may be required*
|Dodge / Ram||2500 Pickup||2009-2013|
|Dodge / Ram||3500 Pickup||2009-2012|
Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 8
PDF (click here)
|(1)||012516||Dodge 5in Rear Block Kit w/4"|
|(1)||012801||Dodge Control Arm Mounts|
|(1)||012802||Dodge Control Arm Box Kit|
|(1)||012803||09-10 Dodge Long Arm Box Kit|
|(1)||122810||03-12 Ram 2500 Coilover Mount Kit|
|(1)||122811||2009-13 Ram 2500 6bolt Indexing Ring Kit|
|(1)||88402097||Kit: BDS 03-13 Ram 2500/3500 Front Coilv|
|(2)||98224761||Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1|
*Subject to change based upon selections
No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.
Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.