• BDS 4" 4-Link Suspension Lift Kit - Ford F250/F350 4WD
BDS590H-GAS

BDS 4" 4-Link Suspension Lift Kit for 2011-2016 Ford F250/F350 Super Duty

  • $2,113.42

BDS Suspension 4" 4-Link Suspension System for 2011-16 Ford F250/F350 4WD trucks.
The full replacement four link system is centered around 4 massive control arms featuring greasable ends. The 4-link system is setup to correct the alignment tire placement inside the wheel well. It also reduces caster change through wheel travel creating a more controlled feel both on and off road. BDS front Pro-Ride Coil Springs are included to provide the lift and can handle full coil bind so they will not sag. The kit also comes with anti-sway bar drop brackets, a dropped pitman arm for steering angle correction, a track bar relocation bracket to properly center your axle and bump stop extensions.
Rear lift options include a 5" block kit that eliminates the factory block or a full replacement leaf spring.

Choose between gas and diesel configurations.

Note: Components displayed in images may change based upon selections.

1. Removal of factory block required. Net rear lift height will vary depending on height of factory block, but will result in a level stance.
2. Front exhaust modification may be required to clear front drive shaft (gas only).
3. If equipped with 2-piece driveshaft, a driveshaft alignment kit may be required.
4. Although extremely rare, front and/or rear driveline vibration may occur.
5. If equipped with rear sway bar, #123009 required.
6. U-bolts will not work on dually.
7. Please select gas or diesel motor. BDS makes specific coil springs for the different motors.

Lift Height
Front (Base Kit): 4 in 4-Link
Rear (Base Kit): 4 in Block Kit

Tire and Wheel Combinations
35" x 12.50" with 17 x 9 and 4.5" backspacing
35" x 12.50" with 18 x 9 and 4.5" backspacing
35" x 12.50" with 20 x 9 and 4.5" backspacing
*Trimming may be required* 

Make Model Year Range
Ford F250/F350 Super Duty 2011-2016

Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 8

Instructions
PDF (click here)

Qty Part# Description
(1) 013010 05-up F250,350 4-link Box Kit 1 Of 2
(1) 013013 11 Ford F250/350 4-link 4in Box (2of2)
(1) 013519 05-up F250/350 5in Rear W/o Ovld
(1) 033411 Coil Spring Box Kit (Diesel)
(2) 85700 BDS NX2 Shock Absorber
(2) 85760 BDS NX2 Shock Absorber

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.