• BDS 4" Suspension Lift Kit - Ford F150 4WD
BDS576H

BDS 4" Lift Kit for 2004-2008 Ford F150 4WD

  • $2,153.43

BDS Suspension 4" Suspension Lift Kit System for 2004-2008 Ford F150 4WD pickup trucks.
This system includes CNC machined steering knuckles to return your vehicle's steering to OE geometry. One piece front & rear crossmember increase rigidity for long term performance. A front differential skid plate and is included to lock the crossmembers together. New front Kevlar lined stainless steel brake lines are included. The rear is lifted with a new block and u-bolt kit.
Choose between the custom valved NX² series or the Fox 2.0 series gas charged monotube rear shocks.

Note: Components displayed in images may change based upon selections.

1. Supercrew models with 4 bed do not require the add-a-leaf 113219.
2. All wheel drive models will require front driveshaft modification.
3. Stock 17s will not fit back on vehicle. Stock 18s & 20s do fit with stock tires.
4. Rear leaf springs 003509 may be used by removing the factory block.
5. Although unusual, a 123609 rear driveshaft spacer may be required.
6. Will not fit HD models (7 lug).

Lift Height
Front (Base Kit): 4 in IFS w/Strut Spacer
Rear (Base Kit): 2 in Block

Tire and Wheel Combinations
35" x 12.50" with 17 x 9 and 4-5/8" backspacing
*Trimming may be required* 

Make Model Year Range
Ford F150 4WD 2004-2008

Difficulty Level (1 easy – 5 complicated): 4
Estimated Installation Time (hours): 10

Instructions
PDF (click here)

Qty Part# Description
(1) 013209 04-08 Ford F150 2in Rear Kit
(1) 023432 04-08 Ford F150 HC Box Kit (1of4)
(1) 023630 04-08 Ford F150 HC (1of4)
(1) 023631 04-08 Ford F150 HC (2of4)
(1) 023633 04-08 Ford F150 HC (4of4)
(2) 85828 NX² Shock Absorber

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.