BDS 2.5" Leveling Kit for 2009-2020 Ford F150 2WD/4WD
- Important Kit Notes
- Vehicle Fitment Data
- Base Kit Components
- Manufacturer's Warranty Statement
BDS Suspension 2-1/2" leveling Kit for Ford F150 2WD and 4WD pickup trucks. This system includes a new upper strut mount as well as pre-load spacers. The use of a pre-load spacer increases performance in cornering as well as offsets the increase weight of larger tires to maintain a quality ride. Unlike most systems on the market, the two piece system does not max out the upper ball joints during suspension travel. A 1" rear block kit is available to maintain a slight rake if desired. Add new NX² series rear shocks for increased stability and improved handling when customizing your kit.
Note: Components displayed in images may change based upon selections.
1. Strut Compressor required for installation.
2. 1" Rear block kit is available in the accessories.
3. Will fit EcoBoost models.
4. This system WILL WORK on Diesel Models.
Front (Base Kit): 2.5 in Strut Mount
Rear (Base Kit): N/A
Tire and Wheel Combinations
35" x 12.50" with 17 x 9 and 5-1/2" - 6-1/2" backspacing
*Trimming may be required*
Difficulty Level (1 easy – 5 complicated): 2
Estimated Installation Time (hours): 2
PDF (click here)
|(1)||013250||F150 2-1/2 In Leveling Kit|
*Subject to change based upon selections
No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.
Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.