• BDS 6-1/2" Long Arm Lift Kit - Jeep Wrangler TJ
BDS467H

BDS 6.5" Long Arm Suspension Lift Kit for 2003-2006 Jeep Wrangler TJ Rubicon & 1997-2006 TJ Standard

  • $2,886.40

BDS Suspension 6-1/2" Lift Kit for the 1997 - 2006 Jeep Wrangler TJ & the 2003 - 2006 Jeep Wrangler TJ Rubicon.
This lift kit comes with four new Pro-Ride Coil Springs capable of full coil bind. The box kit includes a pitman arm for steering correction, adjustable front track bar with a track bar relocation system to match the track bar angles with the steering angles. Four long lower arms are included with flex ends to ensure off road performance.
All new long upper arms are included that are adjustable to fine tune the rear pinion angles as well as the front caster angles, D.O.T. approved Kevlar lined stainless steel brake lines for front and rear, ulitimate sway bar disconnects for the front and extended links for the rear, and NX² series shocks.

Note: Components displayed in images may change based upon selections.

1. A slip yoke eliminator kit and CV style rear drive shaft is required.
2. May require exhaust modification.
3. Some welding required.
4. Long Arm systems also fit short wheel base Rubicon models (not Unlimited models).

Lift Height
Front (Base Kit): 6.5 in Long Arm
Rear (Base Kit): 6.5 in Long Arm

Tire and Wheel Combinations
35" x 12.50" with 16 x 8 and 3-1/2" backspacing
*Trimming may be required* 

Make Model Type Year Range
Jeep Wrangler TJ Rubicon 2003-2006
Jeep Wrangler TJ Standard 1997-2006

Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 10

Instructions
PDF (click here)

Qty Part# Description
(1) 014651 Tj 6.5 In Long Arm Box 2 Of 3
(1) 014657 97-06 Jeep TJ 6.5in LA Box Kit
(1) 014660 97-06 Jeep TJ Long Arm Box (1of3)
(1) 034651 6.5 In Tj Front Coil Springs
(1) 034659 Tj 6.5 In Rear Coil Springs
(2) 85962 NX² Shock Absorber
(2) 85974 NX2 Shock Absorber

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.