• BDS 4-1/2" Short Arm Lift Kit - Jeep Wrangler TJ
BDS422H

BDS 4.5" Short Arm Suspension Lift Kit for 1997-2006 Jeep Wrangler TJ (Inc. Unlimited & Rubicon Models)

  • $1,871.90

BDS Suspension 4-1/2" Suspension Lift Kit for the 1997 - 2006 Jeep Wrangler TJ (Inc. Unlimited & Rubicon Models).
The 4.5" standard lift is anything but standard and comes with front and rear Pro-Ride Coil Springs. BDS corrects the steering geometry using a dropped pitman arm and adjustable front track bar. Kevlar lined stainless steel brake lines front and rear will handle the added wheel travel from this system. Front and rear fixed length lower control arms with rubber bushings are included with the basic system. Front and rear adjustable flex upper control arms with rubber bushings come standard. Now shipping with JKS Quicker Disconnects standard! In addition, front and rear bump stop extensions to control compression travel and cam bolts for proper alignment are included. The rear track bar relocation bracket, centers the axle while the longer rear sway bar links help fight body roll. For the most possible articulation, easy one handed operation, BDS ultimate sway bar disconnects are included. As always, all non-wear items are covered by the BDS No Fine Print Warranty. BDS carries a large selection of accessories for this system, including adjustable flex control arms, belly pan, skid plates, and more. Find out what more is by customizing your system.

Note: Components displayed in images may change based upon selections.

1. A slip yoke eliminator and a CV style rear driveshaft are required for this kit.
2. Some welding required.
3. Rubicon models may require OEM skid plate modification.

Lift Height
Front (Base Kit): 4.5 in Coil Springs
Rear (Base Kit): 4.5 in Coil Springs

Tire and Wheel Combinations
33" x 12.50" with 15 x 8 and 3-1/2" backspacing
*Trimming may be required*

Make Model Type Year Range
Jeep Wrangler LJ Unlimited 2003-2006
Jeep Wrangler TJ Rubicon 2003-2006
Jeep Wrangler TJ Standard 1997-2006

Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 8

Instructions
PDF (click here)

Qty Part# Description
(1) 014457 97-06 Jeep TJ 4.5in Box Kit
(1) 034451 Tj 4.5 In Front Coils
(1) 034459 4.5 In Tj Rear Coil Springs
(2) 124327 TJ/XJ Fixed LCA Kit w/rubber bushings
(1) 124349 TJ Adj. Rear UCA Kit
(2) 85967 NX2 Shock Absorber
(2) 85976 NX2 Shock Absorber

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.