BDS 3" Lift Kit for 1997-2002 Jeep Wrangler TJ Standard
- Important Kit Notes
- Vehicle Fitment Data
- Base Kit Components
- Manufacturer's Warranty Statement
BDS Suspension 3" Lift Kit for the 1997 - 2002 Jeep Wrangler TJ.
This BDS 3" suspension lift has many upgrades available. You can choose the base kit and upgrade individual components or choose the Ultimate kit that gives you the most popular upgrades with a low package price.The 3" base lift comes with front and rear Pro-Ride Coil Springs. In addition, front and rear bump stop extensions to control compression travel and cam bolts for proper alignment are included. The rear track bar relocation bracket, centers the axle while the longer rear sway bar links help fight body roll. For the most possible articulation, easy one handed operation, BDS ultimate sway bar disconnects are included. As always, all non-wear items are covered by the BDS No Fine Print Warranty.
The 3" system has also been put together with a complete upgrade package with a reduced price. The ultimate kit adds adjustable front and rear lower control arms and front and rear upper adjustable control arms to provide the most flexibility possible. Both upper and lower control arms come with greaseable urethane bushings. Front and rear stainless steel brake lines and a front adjustable track bar complete the list of upgrades to this impressive system.
Note: Components displayed in images may change based upon selections.
1. Models with manual transmissions may need shifter opening in the floorboard enlarged.
2. Stabilizer and front lower control arms are highly recommended.
Front (Base Kit): 3 in Coil Springs
Rear (Base Kit): 3 in Coil Springs
Tire and Wheel Combinations
33" x 12.50" with 15 x 8 and 3-1/2" backspacing
*Trimming may be required*
Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 6
PDF (click here)
|(1)||014300||97-02 Jeep Tj 3" Box Kit|
|(1)||034302||97-06 Jeep Tj 3" Front Coils|
|(1)||034308||97-06 Jeep Tj 3" Rear Coils|
|(2)||85965||NX2 Shock Absorber|
|(2)||85980||NX² Shock Absorber|
*Subject to change based upon selections
No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.
Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.