BDS 2" Leveling Kit for Dodge/Ram 2009-2012 1500 Mega Cab, 2009-2013 2500 Pickup, 2008 2500 Pickup, 2003-2007 2500 Pickup, 2009-2012 3500 Pickup, 2008 3500 Pickup, 2003-2007 3500 Pickup
- Important Kit Notes
- Vehicle Fitment Data
- Base Kit Components
- Manufacturer's Warranty Statement
This 2" leveling kit comes with two cast aluminum upper coil buckets. These buckets bolt solid to your upper coil pocket giving you 2" of lift while maintaining your factory ride quality. Perfectly suited to level the stance of your Dodge truck.'
Front and rear NX² series shock absorbers are included with Fox 2.0 series gas shocks available as an upgrade for this 2" lift kit.
Note: Components displayed in images may change based upon selections.
Front (Base Kit): 2 in Coil Spacer
Rear (Base Kit): N/A
Tire and Wheel Combinations
33" x 12.50" with 17 x 9 and 5" backspacing
*Trimming may be required*
|Dodge / Ram||1500 Mega Cab||2009-2012|
|Dodge / Ram||2500 Pickup||2003-2007|
|Dodge / Ram||2500 Pickup||2008|
|Dodge / Ram||2500 Pickup||2009-2013|
|Dodge / Ram||3500 Pickup||2003-2007|
|Dodge / Ram||3500 Pickup||2008|
|Dodge / Ram||3500 Pickup||2009-2012|
Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 4
PDF (click here)
|(1)||012201||2" Dodge Spacer Kit|
|(2)||85700||BDS NX2 Shock Absorber|
|(2)||85759||BDS NX2 Shock Absorber|
*Subject to change based upon selections
No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.
Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.