• BDS 4" Suspension Lift Kit
BDS186H

BDS 4" Suspension Lift Kit for 2007-2013 Chevy/GMC 1500 Pickup 2WD

  • $1,569.44

BDS Suspension 4" Suspension Lift Kit for the 2007-2013 Chevy & GMC 1/2 ton pickup 2WD.
This IFS system is everything you always wanted in a 2WD lift kit. Our new advanced HIGH CLEARANCE design increases the ground clearance and performance.
We use 1/4" thick steel, one-piece front and rear crossmembers to increase frame rigidity and ease installation. New ductile steering knuckles are included that correct steering geometry to O.E. angles. Custom valved front coil over strut cylinders with 18 mm shaft are included, as well as new rear NX² series shocks. A full belly pan for off road protection rounds out this complete lift kit system.

Choose between the custom valved NX² series or the Fox 2.0 series gas charged monotube rear shocks.

Note: Components displayed in images may change based upon selections.

1. Will NOT FIT 2014 MODEL YEAR.
2. Strut compressor required for installation.
3. This system will not fit 2007 Classic models.
4. 20" wheels with 5-1/2" to 5-3/4" backspacing recommended to reduce trimming.
5. Will not fit 2009-12 Two-Mode Hybrid models with Electronic Power Steering (EPS)
6. Will not work on extended/crew cab long box vehicles

Lift Height
Front (Base Kit): 4 in IFS System
Rear (Base Kit): 4 in Block

Tire and Wheel Combinations
32" x 11.50" with 17 x 9 and 4.5" backspacing
33" x 12.50" with 18 x 9 and 5" backspacing
33" x 12.50" with 20 x 9 and 5.75" backspacing
*Trimming may be required* 

Make Model Lift Year Range
Chevy / GMC 1/2 Ton Pickup 2WD 4" 2007-2013

Difficulty Level (1 easy – 5 complicated): 4
Estimated Installation Time (hours): 6

Instructions
PDF (click here)

Qty Part# Description
(1) 011457 99-06 5 In Block And U-bolt Kit
(1) 021640 07-13 GM 1500/SUV 4-6in Front Box (1of2)
(1) 021643 07 Chevy 2wd Box Kit
(2) 85758 NX² Shock Absorber
(1) 98141 07 K1500 4 In Strut

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.