• BDS 4" Suspension Lift Kit
BDS184H

BDS 4" Suspension Lift Kit for 2007-2013 Chevy/GMC 1500 Pickup 4WD

  • $1,837.93

BDS Suspension 4" Lift Kit for 2007 - 2013 Chevrolet/GMC 4WD 1500 Series Silverado/Sierra 1/2 ton pickup.
The unique BDS High Clearance design is a true blend of performance, appearance, and function.The suspension geometry of this 4" lift kit creates a factory style ride with a desert racing appearance. The high arched crossmembers blend perfectly with the angle of the factory installed lower control arms for a completely integrated look while lifting your vehicle a full 4" increasing ground clearance and performance.
This comprehensive IFS lift kit includes ductile steering knuckles correcting steering geometry to O.E. angles and custom valved front coil over strut cylinders with 18 mm shafts designed to handle increased tire & wheel weight without sacrificing ride quality. Heavy duty front and differential skid plates are also included for extreme off road protection as well as rear NX² series shocks.

Choose between the custom valved NX² series or the Fox 2.0 series gas charged monotube rear shocks.

Note: Components displayed in images may change based upon selections.

1. Will NOT FIT 2014 MODEL YEAR.
2. Strut compressor required for installation.
3. This system will not fit 2007 Classic models.
4. Installation of the optional rear leaf springs requires removal of the fuel tank.
5. Requires frame bracket modification.
6. Less trimming is required if 20" x 9" Wheels with 5-3/4" backspacing are used.
7. Traction bars will not fit regular cab, short box models.
8. Add 121651 Auxiliary Differential bracket for AWD models. Also may require front driveline modification.
9. Will not fit 2009-11 Two-Mode Hybrid models with Electronic Power Steering (EPS)

Note: Stock 20" wheels can be re-installed only with factory tire size. Factory 17 and 18's cannot be re-installed.

Lift Height
Front (Base Kit): 4 in High Clearance System
Rear (Base Kit): 3 in Block Kit

Tire and Wheel Combinations
32" x 11.50" on with 17 x 8 and 4-1/2" backspacing
33" x 12.50 on with 18 x 9 and 5" backspacing
33" x 12.50 on with 20 x 9 and 5.75" backspacing
*Trimming may. be required* 

Note: Stock 20" wheels can be re-installed only with factory tire size. Factory 17 and 18's cannot be re-installed.

Make Model Type Year Range
Chevy / GMC 1/2 Ton Pickup 4WD Silverado / Sierra 2007-2013

Difficulty Level (1 easy – 5 complicated): 4
Estimated Installation Time (hours): 8

Instructions
PDF (click here)

Qty Part# Description
(1) 011457 99-06 5 In Block And U-bolt Kit
(1) 021640 07-13 GM 1500/SUV 4-6in Front Box (1of2)
(1) 021644 07-13 GM 1500/SUV 4-6in Front Box (2of2)
(1) 121613 07-13 GM Front Skid Plate
(2) 85758 NX² Shock Absorber
(1) 98141 07 K1500 4 In Strut

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.