BDS 6" Suspension Lift Kit for 2007-2013 Chevy/GMC 1500 Pickup 2WD
- Important Kit Notes
- Vehicle Fitment Data
- Base Kit Components
- Manufacturer's Warranty Statement
BDS Suspension 6" Lift Kit for 2007 - 2013 Chevrolet/GMC 2WD 1500 Series Silverado/Serria 1/2 ton pickup.
This IFS system is everything you always wanted in a 2WD lift kit. Our new advanced HIGH CLEARANCE design actually increases the ground clearance at the front crossmember by 91%.
We use 1/4" thick steel, one piece front and rear crossmembers to increase frame rigidity and ease installation. New ductile steering knuckles are included that correct steering geometry to O.E. angles. Custom valved front coil over strut cylinders with 18 mm shaft are included, as well as new rear NX² series shocks. A full belly pan for off road protection rounds out this complete lift kit system.
Black powder coating, front skid plate, and 9500 series gas shocks and rear Glide-Ride Leaf Springs are some of the options and upgrades available when customizing this 6" 2WD lift kit. Check out the Chevrolet 2010 concept truck using a BDS suspension system.
Note: Components displayed in images may change based upon selections.
1. Will NOT FIT 2014 MODEL YEAR.
2. Strut compressor required for installation
3. This system will not fit 2007 classic models
4. 20" wheels with 5" to 5-3/4" backspacing recommended to reduce trimming.
5. Will not fit two-mode hybrid models with electronic power steering.
Front (Base Kit): 6 in IFS System
Rear (Base Kit): 5.5 in Block & Add-a-leaf
Tire and Wheel Combinations
33" x 12.50" with 17 x 9 and 4.5" backspacing
35" x 12.50" with 17 x 9 or 18 x 9 and 5" backspacing
35" x 12.50" with 20 x 9 and 5.75" backspacing
*Trimming may be required*
|Chevy / GMC||1/2 Ton Pickup 2WD||2007-2013|
Difficulty Level (1 easy – 5 complicated): 4
Estimated Installation Time (hours): 6
PDF (click here)
|(1)||011559||99-13 GM 1500 5.5in Rear Block & AAL|
|(1)||021640||07-13 GM 1500/SUV 4-6in Front Box (1of2)|
|(1)||021643||07 Chevy 2wd Box Kit|
|(2)||85759||BDS NX2 Shock Absorber|
|(1)||98161||07-13 GM 1500 6" Strut|
*Subject to change based upon selections
No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.
Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.