• BDS 6" Coil-Over Lift Kit
BDS174F

BDS 6" Coil-Over Suspension Lift Kit for 2007-2013 Chevy/GMC 1500 Pickup 2WD

  • $3,346.82

BDS Suspension 6" Coil-Over Suspension Lift Kit for 2007 - 2013 Chevrolet/GMC 2WD 1500 Series Silverado/Sierra 1/2 ton pickup.
Through a collaborative effort between BDS Suspension and Fox Racing, BDS now offers this 6" Coil-Over Chevy 1500 2WD suspension system with everything you always wanted in a lift kit. It features Fox 2.5" coil-over remote reservoir shocks and proven BDS parts, all covered by the BDS, no BS warranty.For those seeking additional coil-over compression tunability, Fox's DSC (dual speed compression) adjuster coil-overs are available as an upgrade (more DSC info below). A heavy-duty front differential skid plate is included for off road protection. This system has been rigorously tested to maximize travel and performance on and off the pavement.
BDS 1/4" thick steel, one-piece, front and rear crossmembers increase frame rigidity and increase ground clearance by 91%. New ductile steering knuckles are included to correct the steering geometry. A full belly pan for off road protection rounds out this complete lift kit system for those using their 2wd trucks like 4wd's. This system comes with Fox 2.0 series rear shocks, standard.
Glide-Ride Leaf Springs and rear traction bars are some of the upgrades available when customizing this 6" 2WD lift kit.

FOX Coil-Over Dual Speed Compression (DSC) Adjuster Technology The Dual Speed Compression (DSC) adjuster provides added control and comfort tuning for on-road use while also offering more aggressive damping for use off-road. The adjuster allows for precise suspension tuning with the simple twist of two clearly defined knobs: No tools and no mess, just a way to easily fine-tune your suspension to best suit your needs in any conditions. The DSC increases both low and high-speed compression levels up to 25%, allowing you to maximize small bump compliance and traction while still having the extra damping required for big hits.

- LSC Adjustment Range - The Low Speed Compression (LSC) adjuster knob offers 10 clicks of adjustment and primarily affects compression damping during slow suspension movements such as G-outs or smooth jump landings. It also affects wheel traction and the harshness or plushness of the vehicle's ride.

- HSC Adjustment Range - The High Speed Compression (HSC) adjuster knob offers 12 clicks of adjustment and mainly affects compression damping during medium to fast suspension movements such as steep jump faces, harsh flat landings, and aggressive wash board roads.

Choose between Fox 2.5 Remote Reservoir Coil-Overs or 2.5 Remote Reservoir Coil-Overs with DSC (Dual Speed Compression) adjuster.

Note: Components displayed in images may change based upon selections.

1. Will NOT FIT 2014 MODEL YEAR.
2. Strut compressor required for installation
3. This system will not fit 2007 classic models
4. 20" wheels with 5" to 5-3/4" backspacing recommended to reduce trimming.
5. Will not fit two-mode hybrid models with electronic power steering.
6. Will not work on extended/crew cab long box vehicles

Lift Height
Front (Base Kit): 6 in Coil-Over System
Rear (Base Kit): 5.5 in Block & Add-a-leaf

Tire and Wheel Combinations
33" x 12.50" with 17 x 9 and 4.5" backspacing
35" x 12.50" with 17 x 9 or 18 x 9 and 5" backspacing
35" x 12.50" with 20 x 9 and 5.75" backspacing
*Training may be required* 

Make Model Year Range
Chevy / GMC 1/2 Ton Pickup 2WD 2007-2013

Difficulty Level (1 easy – 5 complicated): 4
Estimated Installation Time (hours): 6

Instructions
PDF (click here)

Qty Part# Description
(2) 001559 Leaf Spring
(1) 011558 99-03 Chevy Rear 5.5" Box Kit
(1) 021640 07-13 GM 1500/SUV 4-6in Front Box (1of2)
(1) 021643 07 Chevy 2wd Box Kit
(1) 88302059 Kit: BDS 07-18 GM 1500 Front Coilover, 2
(2) 98224759 Fox 2.0 Shox 29.8 x 12.6 x 2 -EB1-EB1

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.