BDS 4" IFS Suspension Lift Kit for 2019 Dodge/Ram 1500 Pickup & Rebel w/o Air-Ride | Gas Only
- Important Kit Notes
- Vehicle Fitment Data
- Base Kit Components
- Manufacturer's Warranty Statement
2019 Dodge Ram 1500 4WD. Gas Only.
At the heart of this 4" system BDS utilizes a pair of 1/4" thick laser cut high clearance crossmembers to maximize clearance and provide a solid mounting point for the OE lower control arms. These paired with the heavy duty front skid plate system create a rigid subframe while adding protection for vital steering and driveline components. In place of the factory steering knuckles a pair of specially designed ductile iron replacement steering knuckles are supplied to maintain proper steering geometry for ESC system compatibility. These connect to the factory steering with a pair of heavy duty replacement tie rod ends included in the kit. The front differential is repositioned with BDS's multipoint relocation bracket system to secure the front differential and keep CV axle angles at a minimum. A billet aluminum front driveshaft spacer is also supplied along with longer hardware to allow the reinstallation of the factory driveshaft. Additional ride height on this particular kit comes from a set of top mounted steel fabricated strut spacers to maintain ride quality and handling characteristics. Rounding out the front of this kit are a pair of stainless steel braided extended brake line and sway bar relocation brackets.
In the rear of this 4" lift system the factory coil springs are replaced with 3" ProRide coil springs to level the stance. With the additional ride height the rear suspension geometry is corrected with control arm relocation brackets, a bolt-on rear track bar relocation bracket to recenter the axle, extended length sway bar links to correct operating angle, and bump stop extensions to properly limit up travel. The rear of these kits are rounded out with your choice of specially tuned NX2 nitro series gas shocks or FOX 2.0 IFP performance series gas shocks to offer improved damper performance. All kits come finished in a durable textured black powdercoat and sent with all hardware packs to complete the install along with step-by-step installation instructions. All BDS kits include Factory Protection Plus for the ultimate extended warranty to include BDS's No Fine Print Warranty, ESC System compatibility and a 5year-100mile drivetrain warranty to match the dealer. Improve the look and capability of your 2019 RAM 1500 truck with this new 4" lift system from BDS Suspension.
Designed to correct suspension, steering and driveline geometry High clearance laser cut crossmembers maximize ground clearance Ductile iron steering knuckles for strength and ESC system compatibility Multipoint differential relocation brackets to correct CV angles Top mounted strut spacer retains factory ride quality Allows fitment of up to 35" tires.
Note: Components displayed in images may change based upon selections.
1. RAMs with factory 22" wheels require the larger bore knuckles due to larger wheel bearing assembly. Reference build code WPM or WPZ
2. Will NOT fit adjustable "air ride" suspension equipped models
3. Will NOT fit 2019 RAM 1500 Classic models, Refer to the 2018 kit listings
4. Stock 17" wheels cannot be reinstalled to to steering interference. Stock 20s can be reinstalled with factory tire size
5. This kit will NOT work on Diesel models.
6. RAMs with factory 22" wheels require the larger bore knuckles due to larger wheel bearing assembly. Reference build code WPM or WPZ. Please make the appropriate selection.
Front (Base Kit): 4" in Coil Spacer
Rear (Base Kit): 3" in Coil Spring
Tire and Wheel Combinations
35x12.50 with 17x9 and 4.5" backspacing
35x12.50 with 18x9 and 5" backspacing
*Trimming may be required*
|Dodge / Ram||1500 Pickup||w/o Air-Ride||4"||2019|
|Dodge / Ram||1500 Rebel||w/o Air-Ride||4"||2019|
Difficulty Level (1 easy – 5 complicated): 4
Estimated Installation Time (hours): 10
PDF (click here)
|(1)||022404||2019 Ram 1500 4in Strut Spacer Box Kit|
|(1)||022508||2019 Ram 1500 Rear Box Kit|
|(1)||022632||2019-20 Ram 1500 Knuckle Box Kit DRV|
|(1)||022633||2019-20 Ram 1500 Knuckle Box Kit PASS|
|(1)||022634||2019 Ram 1500 Front Box Kit 1of2|
|(1)||022635||2019 Ram 1500 Front Box Kit 2of2|
|(1)||032308||2019 Ram 1500 3in Rear Coil Box Kit|
|(2)||85750||NX² Shock Absorber|
*Subject to change based upon selections
No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.
Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.