• BDS 2" Leveling Kit Ram 2500 4WD Rear AirRide
BDS1635H

BDS 2" Leveling Kit for 2014-2018 Dodge/Ram 2500 Pickup w/ Rear Air-Ride

  • $383.45

BDS Suspension 2" Spacer Kit for the new 2014-17 Ram 2500 4wd with the redesigned RADIUS ARM front suspension and rear AirRide suspension.
The heavy construction, steel fabricated and powder coated upper coil spacers are pitched and indexed properly to work with the new Ram's unique coil mount. A retaining bolt mounted through an existing hole in the coil bucket maintains proper indexing and holds the spacer securely in place when the coil springs are unloaded.
Front and rear replacement shocks and extended front polyurethane bump stops round out the kit and give the new Ram the level stance most people prefer.

Note: Components displayed in images may change based upon selections.

1. Will not fit 2013 and older models
2. Will not fit RAM 2500 Powerwagon models

Lift Height
Front (Base Kit): 2 in Coil Spacer
Rear (Base Kit): N/A

Tire and Wheel Combinations
35x12.50-17 with 17 x 9 and 5" backspacing
35x12.50-18 with 18 x 9 and 5" backspacing
35x12.50-20 with 20 x 9 and 5" backspacing
*Trimming may be required* 

Make Model Type Lift Location Year Range
Dodge / Ram 2500 Pickup w/ Rear Air-Ride 2" Front 2014-2018

Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 4

Instructions
PDF (click here)

Qty Part# Description
(1) 012205 14-up Ram 2500 2in w/rear AirRide
(2) 85705 NX² Shock Absorber
(2) 85713 NX² Shock Absorber

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.