• BDS 4" 4-Link Suspension System Ram 2500 4WD (Diesel) w/ Rear Air Ride
BDS1632H

BDS 4" 4-Link Suspension Lift Kit for 2014-2018 Dodge/Ram 2500 Pickup w/ Rear Air-Ride | Diesel Only

  • $2,139.42

BDS Suspension 4" 4-Link Suspension System for 2014-16 Ram 2500 4WD Diesel w/ Rear Air Ride. Diesel Only.
The heart of this system is the 4-link conversion that replaces the factory radius arm. Key benefits include to doing this include increased stability, wheel travel, and improved handling across all terrains. The 4-link design limits caster change to less than 1-degree of change throughout wheel travel for better handling, steering control, and overall driveability. Included are a pair of massive frame-mounted brackets precision welded and engineered to locate the new upper and lower control arms to create the optimal suspension geometry for late model RAM trucks. The 4-link brackets are fabricated from 1/4" thick steel and wrap around the frame as well as the factory radius arm brackets to create an extremely sturdy mount for the new arms. Removal of the factory radius arm brackets is not required allow the brackets to stay intact to speed up the installation time and make these kits reversible. The upper and lower control arms are built from 2" OD x 3/16" wall DOM tubing for the strength to take any abuse you can throw at them. They utilize large 2.5" OD polyurethane bushings to isolate road vibrations and are formed inward to allow for extra tire clearance while repositioning the front axle slightly forward for increase tire clearance to the backside of the front fenders when turned. These arms are finished in a durable textured black powder coating and use grease fittings for easy servicing.
The additional front height comes from a pair of specially designed progressive rate ProRide coil springs. The 4" coils have been engineered and tested to improve the ride quality and performance across all terrains while holding up to the rigors that 3/4-ton truck owners demand. A heavy duty track bar relocation bracket is included to recenter the front axle once lifted as well as a forged drop pitman arm to correct steering angles. Sway bar relocation brackets are used to reposition the front sway bar assembly and the supplied brake line brackets allow for the easy adjustment for the stock lines to be reused with the lift kit.
In the rear, 1/4" steel, 3.5" tall gusseted air bag spacers are used along with a rear track bar bracket to correct axle positioning, extended length sway bar links, and bump stop extensions. BDS supplies new air ride leveling sensor brackets to position the ride height sensors at the stock angle. This allows the rear suspension to be perform just like it does at factory ride height and maintain full air bag range of motion. The rear suspension is rounded out with your choice of NX² series or FOX 2.0 shocks.

Note: Components displayed in images may change based upon selections.

1. Not for use with factory rear coil spring suspensions
2. Fits Diesel Models Only
3. Will not fit RAM 2500 Powerwagon models
4. Models equipped with a 2 piece rear driveshaft may require carrier bearing drop kit # 122405
5. Will not fit Cab and Chassis models

Lift Height
Front (Base Kit): 4 in Coil Spring/4 Link
Rear (Base Kit): 3.5 in Air Bag Spacer

Tire and Wheel Combinations
37x12.50 with 17", 18", 20"x9 and 5.625" backspacing
35x12.50 with 17", 18", 20"x9 and 4.5" backspacing
*Trimming may be required* 

Make Model Type Lift Year Range
Dodge / Ram 2500 Pickup w/ Rear Air-Ride 4" 2014-2018

Difficulty Level (1 easy – 5 complicated): 4
Estimated Installation Time (hours): 6-8

Instructions
PDF (click here)

Qty Part# Description
(1) 012359 14-18 Ram 2500 3.5" Rear AirRide Box Kit
(1) 012403 2013-2018 Ram 3500 4-Link Box Kit (2of2)
(1) 012414 2013-18 Ram 4-Link Box Kit (1of2)
(1) 032401 13-18 3500 - 14-18 2500 Ram Coils 4in Di
(2) 85752 NX² Shock Absorber
(2) 85764 Shock- 24.80 x 14.80 x 2 - Special/EB1

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.