BDS 3" Radius Arm Suspension Lift Kit for 2014-2018 Dodge/Ram 2500 Pickup w/ Rear Coil | Diesel Only
- Important Kit Notes
- Vehicle Fitment Data
- Base Kit Components
- Manufacturer's Warranty Statement
BDS Suspension 2014-2017 Ram 2500 3" Radius Arm Lift System.
This kit is perfect for those looking for all the performance of a full-out lift system but with the height of a leveling kit. This new system is built around massive tubular replacement radius arms. These arms are built to handle far more than the factory parts they are replacing. The design incorporates a factory style rubber bushing mount at the frame to keep the NVH levels in check. The 3-1/4" diameter bushings are huge and have a long, maintenance-free service life. The new radius arms mount right into the factory locations so installation is simple and clean. Factory alignment adjustability is maintained using the OE eccentric adjusters. The arm geometry is set to keep the axle angle in the factory specs while compensating for the 3" of lift. A copper-anodized aluminum BDS name plate is mounted each arm.
In addition to the heavy-duty, high-performance radius arms, this new system features dual-rate front coil springs that improve the ride and handling of these 3/4 ton trucks both on and off road. Our popular heavy-duty turnbuckle style adjustable track bar is included to center the axle. BDS greaseable front sway bar links reset the sway bar to the optimum angle and round out the main front components. These links utilize spherical polyurethane bushings for increased articulation and performance. Add in the front brake line relocation brackets and a choice of NX² series or FOX 2.0 Performance Series shocks and this system is set to handle any terrain.
The rear system utilizes 1.25" fabricated steel coil spring spacers to level out the stance. A new raised track bar bracket centers up the axle while bump stop extensions and greaseable extended sway bar links (same design as the fronts) round out the rear components.
Note: Components displayed in images may change based upon selections.
1. Not compatible with factory rear air ride vehicles
Front (Base Kit): 3 in Radius Arm
Rear (Base Kit): 2 in Block Kit
Tire and Wheel Combinations
35" x 12.50 with 17" x 9" and 5" backspacing
35" x 12.50" with 18" x 9" and 5" backspacing
35" x 12.50" with 20" x 9" and 5" backspacing
*Trimming may be required*
|Dodge / Ram||2500 Pickup||w/ Rear Coil Springs||3"||Front & Rear||2014-2018|
Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 5
PDF (click here)
|(1)||012129||14-18 Ram 2500 Rear Box Kit|
|(1)||012311||2013-up Ram 3500 3in Front Box Kit|
|(1)||032302||4" Coil Box Kit|
|(1)||122321||2013-up Ram 2500/3500 Radius Arm Box Kit|
|(2)||85700||BDS NX2 Shock Absorber|
|(2)||85755||BDS NX2 Shock Absorber|
*Subject to change based upon selections
No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.
Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.