BDS 5.5" 4-Link Suspension Lift Kit for 2013-2018 Dodge/Ram 3500 Pickup w/o Air-Ride | Gas Only
- Important Kit Notes
- Vehicle Fitment Data
- Base Kit Components
- Manufacturer's Warranty Statement
BDS Suspension Ram 3500 Gas Only 5.5" 4-Link Suspension System.
The latest suspension system option to come from BDS is a complete conversion system for the new radius arm suspension on the Ram 3500 w/gas engine. Like our popular 2005-2016 Ford Super Duty systems, we replace the factory radius arm setup for 4-link system. The design starts with 2 massive frame brackets that provide the mounting points for the new upper and lower control arms. These brackets locate off of the factory radius arm brackets, no factory bracket removal required.
The new 4-Link brackets mount similar to the current radius arm relocation brackets, wrapping the frame and nesting in the factory radius arms mounts. As with our radius arm brackets, there is a minor amount of welding required to install the threaded frame insert (1 per side). This insert is necessary to provide the strongest possible mount. The new control arm positions at the frame create better suspension geometry and reduce caster change through wheel travel compared to the radius arm setup. This creates better handling and more controlled steering "feel", especially in rough terrain when the suspension is allowed to travel and articulate. The large diameter, heavy-wall tubular control arms are formed for tire clearance when turning and position the axle slightly forward from stock to create more clearance to the rear portion of the front fenders.
As with the current BDS 5.5" radius arm kits, the new front coils spring are progressive rate in order to provide excellent on road ride and offroad performance. Track bar relocation, a dropped pitman arm and brake line relocation round out the front portion of the system.
The rear is lifted via block and new ubolts to achieve a level stance. Available with both NX² series and Fox/BDS 2.0 shocks as well as with an expanding list of accessories we offer for the new Ram.
Note: Components displayed in images may change based upon selections.
1. For rear leaf spring equipped models only.
2. Will not work with 6.4L Hemi models due to exhaust clearance. Contact Tech Support Prior to ordering for details.
3. Will not fit Cab and Chassis models.
4. Not for use with factory rear airbag suspensions.
Front (Base Kit): 5.5 in Coil Spring
Rear (Base Kit): 4.5 in Block Kit
Tire and Wheel Combinations
37" x 13.50 with 17" x 9" and 5.625" backspacing
35" x 12.50" with 18" x 9" and 4.5 backspacing
*Trimming may be required*
|Dodge / Ram||3500 Pickup||w/o Air-Ride||5.5"||2013-2018|
Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 5
PDF (click here)
|(1)||012403||2013-2018 Ram 3500 4-Link Box Kit (2of2)|
|(1)||012516||Dodge 5in Rear Block Kit w/4"|
|(1)||012604||2013 Ram 3500 6" 4-Link Box Kit (1of2)|
|(1)||032401||13-18 3500 - 14-18 2500 Ram Coils 4in Di|
|(1)||122616||Ram T-Case Index - Gas - 6 Bolt|
|(2)||85752||NX² Shock Absorber|
|(2)||85761||NX² Shock Absorber|
*Subject to change based upon selections
No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.
Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.