• BDS 2" Leveling Kit 2019 Ford Ranger
BDS1544H

BDS 2" Leveling Kit for 2019 Ford Ranger

  • $153.97

BDS Suspension 2" Leveling Kit for 2019 Ford Ranger 4WD.
Specially designed for the new Ranger, this 2" leveling kit is engineered for additional tire clearance and improved performance without overextending the suspension or driveline angles at full suspension droop (as is the case with other top mounted spacers and taller leveling kits on the market). The issue with most other kits is they increase the overall length of the strut assembly maxing out ball joints and causing the CV shaft/boot to operate at an extreme angle leading to premature wear/failure of the components. To get around this apparent issue the BDS kit uses a 2-piece design with a smaller top mounted steel strut spacer in combination with a preload spacer. The top mounted spacer installs easily and is finished in a durable black e-coating for a clean appearance. The preload spacer installs below the spring and raises the ride height without extending the overall extended length of the strut assembly while maintaining factory ride quality allowing you to get the most out of your new Ranger's factory suspension.
Also included in this new 2" leveling kit are a pair of precision tuned rear gas shocks to further enhance your Ranger's performance. The BDS NX2 twin tube gas shocks come standard or can be upgraded to the FOX 2.0 performance series IFP shocks for race proven damper technology. Give your new Ranger the extra boost with this 2" leveling kit from BDS Suspension.
Improve you ride while leveling your truck by replacing the factory rear shocks. BDS offers both NX² series and Fox 2.0 series shocks good for 0-2" of rear lift.

Note: Components displayed in images may change based upon selections.

Lift Height
Front (Base Kit): 2 in Strut Spacer + Preload
Rear (Base Kit): N/A

Tire and Wheel Combinations
285-70 R17 with Stock 17" and - backspacing
285-65 R18 with Stock 18" and - backspacing
*Trimming may be required*

Make Model Lift Year Range
Ford Ranger 4WD 2" 2019

Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 3

Instructions
PDF (click here)

Qty Part# Description
(1) 013203 2019 Ford Ranger 2" Leveling Kit
(2) 85880 Shock- 25.95 x 15.40 x 2 - EB1/EB1

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.