• BDS 4" Coilover Suspension System Ford F150 2WD
BDS1523F

BDS 4" Coilover Suspension Lift Kit for 2015-2020 Ford F150 2WD

  • $3,403.81

BDS Suspension 4" Coil Over Suspension Lift Kit System for the Ford F150 2WD pickup trucks.
This 4'' Performance Coilover Systems brings together the safety and capability of BDS's 4'' lift kits with the uncompromising performance of Fox factory series 2.5 remote reservoir coilovers and rear Fox 2.0 IFP shocks for true blend of on-road comfort and offroad performance, engineered to the highest standard using quality materials built right here in the USA.
The Fox factory series 2.5 remote reservoir coilovers come pre-tuned with Eibach coil springs for impressive high speed offroad performance. The coilovers are pre-dialed to provide 4" of lift right out of the box to speed up installation. For those needing additional coil-over compression tunability, Fox's DSC (dual speed compression) adjuster coil-overs are available as an upgrade. Both coilovers are built to outperform out on the trail while offering fade free performance to push your new F150 to the limits.
Also supplied are a pair of high clearance one-piece laser cut 1/4" steel crossmembers, CNC-machined ductile iron steering knuckles, heavy duty replacement ball joints, sway bar relocation brackets, new alignment cam bolts, and billet aluminum driveshaft spacer.
In the rear a 4" block kit replaces the factory 1.25'' block to eliminate stacking blocks. Rear brake line extensions and Fox 2.0 shocks round out this kit offering exceptional performance on any terrain and clearance for up to 35'' tires to be installed.
This new 4'' lift kit is certified compliant with the National Highway Traffic Safety Administration's (NHTSA) FMVSS No.126 standards to not adversely effect the factory installed Electronic Stability Control (ESC) Systems installed on the new 2015-16 Ford F150. Along with FMVSS No.126 compliance, all BDS kits include the Factory Protection Plus Program offering peace of mind on road or on the trail. All kits include BDS's No Fine Print Warranty and a 5 year - 60,000 mile PLUS drivetrain warranty for the best lifted suspension protection coverage on the market.

FOX Coil-Over Dual Speed Compression (DSC) Adjuster Technology The Dual Speed Compression (DSC) adjuster provides added control and comfort tuning for on-road use while also offering more aggressive damping for use off-road. The adjuster allows for precise suspension tuning with the simple twist of two clearly defined knobs: No tools and no mess, just a way to easily fine-tune your suspension to best suit your needs in any conditions. The DSC increases both low and high-speed compression levels up to 25%, allowing you to maximize small bump compliance and traction while still having the extra damping required for big hits.

- LSC Adjustment Range - The Low Speed Compression (LSC) adjuster knob offers 10 clicks of adjustment and primarily affects compression damping during slow suspension movements such as G-outs or smooth jump landings. It also affects wheel traction and the harshness or plushness of the vehicle's ride.

- HSC Adjustment Range - The High Speed Compression (HSC) adjuster knob offers 12 clicks of adjustment and mainly affects compression damping during medium to fast suspension movements such as steep jump faces, harsh flat landings, and aggressive wash board roads.

Choose between Fox 2.5 Remote Reservoir Coil-Overs or 2.5 Remote Reservoir Coil-Over with DSC (Dual Speed Compression) adjuster.

Note: Components displayed in images may change based upon selections.

1. 18" wheels with 5-5.5" total backspacing should be test fir prior to mounting tire to ensure proper clearance to BDS steering knuckle.
2. 18" or larger diameter wheels required. Stock 17" & 18" wheels cannot be reinstalled. Stock 20" wheels can be used with up to a 305/60-20 tires.
3. Models with a 2-piece rear driveshaft may require carrier bearing drop shim kit #122405
4. This system WILL WORK on Diesel Models.
5. This kit is FMVSS No.126 Compliant

The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well. BDS Suspension is leading the industry by independently testing all suspension kits to verify our kits are fully compliant with the stability control system requirements set by Federal Motor Vehicle Safety Standard (FMVSS) No. 126.

Lift Height
Front (Base Kit): 4 in Coilover
Rear (Base Kit): 4 in Block

Tire and Wheel Combinations
35" x 12.50" with 18 x 9 and 5" backspacing
35" x 12.50" with 18 x 9 and 5 - 5.5" backspacing
35 x 12.50 with 20 x 9 and 5-5.5" backspacing
*Trimming may be required* 

Make Model Lift Year Range
Ford F150 2WD 4" 2015-2020

Difficulty Level (1 easy – 5 complicated): 4
Estimated Installation Time (hours): 8-10

Instructions
PDF (click here)

Qty Part# Description
(1) 013429 09-15 F150 4" Rear Block Kit
(1) 023634 15-20 F150 Knuckle Box Kit - DS
(1) 023635 15-20 F150 Knuckle Box Kit - PS
(1) 023644 2015-16 F150 2wd Box Kit
(1) 88302134 Kit: BDS 14-20 Ford F150, Front Coilover
(2) 98224828 Fox 2.0 Shock 31.02 x 18.95 x 2- EB1/EB1

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)

Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.