• BDS 6" Suspension Lift Kit - Ford F150 2WD
BDS1522H

BDS 6" Suspension Lift Kit for 2015-2020 Ford F150 2WD

  • $1,702.93

BDS Suspension 6" Suspension Lift Kit System for the Ford F150 2WD pickup trucks. This high clearance IFS system is engineered to the highest standard, using quality materials built right here in the USA. The kit offers a smooth ride and reliable on-road handling coupled with impressive off-road performance and clearance for larger tires. Utilizing a pair of one-piece laser cut 1/4" steel crossmembers as the foundation, this system also features CNC-machined ductile iron steering knuckles, crossmember support braces, sway bar relocation brackets, new alignment cam bolts and upper strut mount spacers to retain the OE ride quality and correct the suspension geometry. In the rear an offset pin lift block and u-bolt kit is used in place of the factory block to recenter the axle within the wheelwell and level the stance. Rear brake line extensions and your choice of rear BDS NX2-series or FOX 2.0 performance gas shocks round out these kits. This 6" system is certified compliant with the National Highway Traffic Safety Administration's (NHTSA) FMVSS No.126 standards to not adversely effect the factory installed Electronic Stability Control (ESC) Systems installed on the 2WD Ford F150. Along with FMVSS No.126 compliance, all BDS kits include the Factory Protection Plus Program offering peace of mind on road or on the trail. All kits include BDS's No Fine Print Warranty and a 5 year - 60,000 mile PLUS drivetrain warranty for the best lifted suspension protection coverage on the market.
One-piece High Clearance crossmember Ductile iron steering knuckles Upper strut mount spacers Crossmember braces for subframe rigidity Offset pin block kit to recenter rear axle.

Choose between the custom valved NX² series or the BDS by Fox 2.0 series gas charged monotube rear shocks.

Note: Components displayed in images may change based upon selections.

1. 18" wheels with 5-5.5" total backspacing should be test fir prior to mounting tire to ensure proper clearance to BDS steering knuckle.
2. 18" or larger diameter wheels required. Stock 17" & 18" wheels cannot be reinstalled. Stock 20" wheels can be used with up to a 305/60-20 tires.
3. The 4" blocks will net a level/tail LOW stance. The 5" blocks will net a level/tail HIGH stance. 4. Models with a 2-piece rear driveshaft may require carrier bearing drop shim kit #122405
4. This system WILL WORK on Diesel Models.
5. This kit is FMVSS No.126 Compliant

The NHTSA's Federal Motor Vehicle Safety Standard (FMVSS) No.126 requires all new passenger vehicles to include Electronic Stability Control (ESC) systems that meet certain standards that can be tested through a comprehensive series of evasive maneuvers. Aftermarket products must meet these standards as well. BDS Suspension is leading the industry by independently testing all suspension kits to verify our kits are fully compliant with the stability control system requirements set by Federal Motor Vehicle Safety Standard (FMVSS) No. 126.

Lift Height
Front (Base Kit): 6 in Strut Spacer
Rear (Base Kit): 5 in Block

Tire and Wheel Combinations
37" x 12.50" with 18 x 9 and 5" backspacing
35" x 12.50" with 18 x 9 and 5 - 5.5" backspacing
37 x 12.50 with 20 x 9 and 5 - 5.5" backspacing
*Trimming may be required* 

Make Model Year Range
Ford F150 2WD 2015-2020

Difficulty Level (1 easy – 5 complicated): 4
Estimated Installation Time (hours): 8-10

Instructions
PDF (click here)

Qty Part# Description
(1) 013529 09-14 F150 Rear
(1) 023605 2014-15 F150 6in Spacer Box Kit
(1) 023634 15-20 F150 Knuckle Box Kit - DS
(1) 023635 15-20 F150 Knuckle Box Kit - PS
(1) 023644 2015-16 F150 2wd Box Kit
(2) 85760 BDS NX2 Shock Absorber

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.