• BDS 2" Leveling Kit
BDS1519H

BDS 2" Leveling Kit for 2017-2019 Ford F250/F350 Super Duty

  • $452.95

BDS Suspension 2" Coil Spring Spacer Leveling Kit for 2017 Ford F250/F350 4WD Gas & Diesel pickup trucks.
These 2" leveling kits are designed to level the stance of your truck while allowing for 35" tires to be installed. Compatible with both diesel and gas model trucks, this 2" leveling kit uses bolt-in lower coil mount spacers built from solid 6061 aluminum for better wheel well aesthetic than top mount coil spacers. Also supplied in the kit are a pair of ball joint alignment cams to properly align your vehicle, a heavy duty replacement track bar bracket to recenter the front axle laterally and your choice of new shocks at each corner for improved handling performance.

Choose from BDS NX² series shocks or Fox 2.0 Performance Series

Note: Components displayed in images may change based upon selections.

1. Fits Gas & Diesel 4WD Models

Lift Height
Front (Base Kit): 2 in Coil Spacer
Rear (Base Kit): N/A

Tire and Wheel Combinations
35" x 12.50" with 17 x 9 and 4.5" backspacing
35" x 12.50" with 18 x 9 and 4.5" backspacing
35" x 12.50" with 20 x 9 and 4.5" backspacing
*Trimming may be required* 

Make Model Year Range
Ford F250/F350 Super Duty 2017-2019

Difficulty Level (1 easy – 5 complicated): 2
Estimated Installation Time (hours): 4

Instructions
PDF (click here)

Qty Part# Description
(1) 013202 2017 Super Duty 2in Front Spacer Box Kit
(2) 85710 NX² Shock Absorber
(2) 85717 Shock- 29.80 x 17.60 x 2-3/8 - EB1/EB1

*Subject to change based upon selections

No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.

Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.