BDS 2.5" Coil-Over Conversion Suspension Lift Kit for 2011-2016 Ford F250/F350 Super Duty | Diesel Only
- Important Kit Notes
- Vehicle Fitment Data
- Base Kit Components
- Manufacturer's Warranty Statement
Get next level performance from your late model Ford Super Duty with the BDS 2.5" coilover conversion system with minimal lift. These systems convert the standard front coil springs over to FOX 2.5 remote reservoir coilovers for vastly improved dampening capability and performance across any terrain. The kit includes new coilover mounts that bolt into the factory coil buckets for easy installation and allow the addition of an auxiliary FOX 2.0 shock in the stock location. Alignment cams are used to correct the positioning of the factory radius arms and paired with the heavy adjustable track to reposition the front axle under the truck. Along with sway bar relocation brackets and brake line brackets, this kit uses a 4" replacement lift block and u-bolt kit to net a level stance with room for 35" tires.
Take your Super Duty to the next level with BDS Suspension and FOX.
Note: Components displayed in images may change based upon selections.
1. Designed for Diesel models w/o top mounted overload rear springs
2. Models equipped with a 3-3/4" rear block from the factory do not require a rear block kit in order to achieve a more level stance.
3. For a more tail-high stance, substitute #013519 5" rear block kit
Front (Base Kit): 2.5 in Coil-Over
Rear (Base Kit): 2 in Blocks
Tire and Wheel Combinations
35" x 12.50" with 17 x 9 and 5" backspacing
35" x 12.50" with 18 x 9 and 5" backspacing
35" x 12.50" with 20 x 9 and 5" backspacing
*Trimming may be required*
|Ford||F250/F350 Super Duty||2011-2016|
Difficulty Level (1 easy – 5 complicated): 3
Estimated Installation Time (hours): 6
PDF (click here)
|(1)||013254||2005-15 F250 2.5in Front Box Kit|
|(1)||013408||2011-15 F250 4in Rear Block Kit|
|(1)||123212||05-16 F250 Coil-over Mount Kit (2-4in)|
|(1)||88402148||Kit: BDS 11-20 Ford F250/F350 Front Coil|
|(2)||98224710||Fox 2.0 Shock 22.95 x 14.35 x 2- S50/EB1|
|(2)||98224760||Fox 2.0 Shock 33.85 x 20.75 x 2- EB1/EB1|
*Subject to change based upon selections
No Fine Print Warranty
BDS stands behind its products and that’s evident by their No Fine Print Warranty. This no-BS warranty protects the original purchaser against breakage, bending, sagging, or any other usage failure. This “no fine print” lifetime replacement warranty extends to cover all BDS hard parts as well as bushings. Exclusions would be product finish and wearable items such as shock/stabilizer cylinders, tie rod ends and ball joints that would fall under the separate Limited Lifetime Warranty policy. Beginning February 1, 2020 all new kit purchases include the No Fine Print Warranty on bushings.
Limited Lifetime Warranty (for wearable items)
Wearable items include shock/steering stabilizer cylinders, ball joints and tie rod ends. BDS Suspension Co. warrants to the original retail purchaser that its these wearable parts are free from defects in material and workmanship for so long as they own the vehicle. Excluded from this warranty are the finish of the product. Defects in material and workmanship do not include such things as dented cylinders or bent rods caused by obvious side impact, rust or corrosion. A shock absorber is a wear item and over time will experience diminished damping resistance due to normal component wear. This is not a defect in material or workmanship and is therefore not warrantable.